Cleaning The Glass Cooktop - GE Profile PHS920 Owner's Manual

Electric induction free-standing and slide-in ranges
Hide thumbs Also See for Profile PHS920:
Table of Contents

Advertisement

Available languages

Available languages

Cleaning the Glass Cooktop

Normal Daily Use Cleaning
ONLY use CERAMA BRYTE
on the glass cooktop. Other creams may not be as
effective.
To maintain and protect the surface of your glass
cooktop, follow these steps:
1. Before using the cooktop for the first time, clean it
with CERAMA BRYTE
This helps protect the top and makes cleanup easier.
2. Daily use of CERAMA BRYTE
Cleaner will help keep the cooktop looking new.
3. Shake the cleaning cream well. Apply a few drops of
CERAMA BRYTE
to the cooktop.
Burned-On Residue
NOTE: DAMAGE to your glass surface may occur if you
use scrub pads other than those recommended.
1. Allow the cooktop to cool.
2. Spread a few drops of CERAMA BRYTE
Cooktop Cleaner on the entire burned residue area.
3. Using the included CERAMA BRYTE
for Ceramic Cooktops, rub the residue area, applying
pressure as needed.
4. If any residue remains, repeat the steps listed above
as needed.
Heavy, Burned-On Residue
1. Allow the cooktop to cool.
2. Use a single-edge razor blade scraper at approximately
a 45° angle against the glass surface and scrape the
soil. It will be necessary to apply pressure to the razor
scraper in order to remove the residue.
3. After scraping with the razor scraper, spread a few drops
of CERAMA BRYTE
entire burned residue area. Use the CERAMA BRYTE
Cleaning Pad to remove any remaining residue.
4. For additional protection, after all residue has been
removed, polish the entire surface with CERAMA
BRYTE
®
Ceramic Cooktop Cleaner and a paper towel.
22
®
Ceramic Cooktop Cleaner
®
Ceramic Cooktop Cleaner.
®
Ceramic Cooktop
®
Ceramic Cooktop Cleaner directly
®
®
Cleaning Pad
®
Ceramic Cooktop Cleaner on the
4. Use a paper towel or
CERAMA BRYTE
Pad for Ceramic Cooktops
to clean the entire cooktop
surface.
5. Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE: It is very important that
you DO NOT heat the cooktop
until it has been cleaned
thoroughly.
5. For additional protection, after all residue has been
removed, polish the entire surface with CERAMA
BRYTE
Ceramic
®
The CERAMA BRYTE
recommended supplies are available through our Parts Center.
See instructions under "Assistance / Accessories" section.
NOTE: Do not use a dull or nicked blade.
Cleaning
®
Clean your cooktop after each
spill. Use CERAMA BRYTE
Ceramic Cooktop Cleaner.
®
Ceramic Cooktop Cleaner and a paper towel.
Use a CERAMA BRYTE
Cleaning
®
Pad for Ceramic Cooktops.
Ceramic Cooktop Scraper and all
®
®
49-80695-2

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Profile phb920Profile phs920sfss

Table of Contents