Cleaning The Glass Cooktop - GE JBS360DMBB Owner's Manual

Cleaning the Glass Cooktop

Normal Daily Use Cleaning
ONLY use ceramic cooktop cleaner on the glass
cooktop. Other creams may not be as effective.
To maintain and protect the surface of your glass
cooktop, follow these steps:
1. Before using the cooktop for the first time, clean it
with ceramic cooktop cleaner. This helps protect the
top and makes cleanup easier.
2. Regular use of ceramic cooktop cleaner will help keep
the cooktop looking new.
3. Shake the cleaning cream well. Apply a few drops of
ceramic cooktop cleaner directly to the cooktop.
ceramic cooktops to clean the entire cooktop surface.
Burned-On Residue
NOTE:
use scrub pads other than those recommended.
1. Allow the cooktop to cool.
2. Spread a few drops of ceramic cooktop cleaner on
the entire burned residue area.
cooktops, rub the residue area, applying pressure as
needed.
4. If any residue remains, repeat the steps listed above
as needed.
5. For additional protection, after all residue has been
removed, polish the entire surface with ceramic
cooktop cleaner and a paper towel.
Heavy, Burned-On Residue
1. Allow the cooktop to cool.
a 45° angle against the glass surface and scrape the
soil. It will be necessary to apply pressure to the razor
scraper in order to remove the residue.
3. After scraping with the razor scraper, spread a few drops
of ceramic cooktop cleaner on the entire burned residue
remaining residue.
4. For additional protection, after all residue has been
removed, polish the entire surface with ceramic cooktop
cleaner and a paper towel.
22
towel to remove all cleaning
residue. No need to rinse.
NOTE: It is very important that
until it has been cleaned
thoroughly.
ceramic cooktops.
A non-scratch ceramic cooktop scraper and all recommended
supplies are available through our Parts Center. See the
Accessories and Consumer Support sections at the end of this
manual.
NOTE:
Ceramic
Cooktop
Cleaner
Clean your cooktop after each
spill. us e ceramic cooktop
cleaner.
49-88075 Rev. 3