Garage Door Opener - Dodge Charger 2021 Quick Start Manual

HomeLink
®

GARAGE DOOR OPENER

1
While the car is ON, hold the handheld garage door transmitter 1-3 inches
from the HomeLink button you want to program in the vehicle.
®
2
Push and hold both the HomeLink
on the garage door transmitter.
TO ERASE ALL SET CHANNELS:
Push and hold the two outside HomeLink
indicator flashes. An individual channel cannot be erased.
button being programmed and the button
®
® buttons for 20 seconds until the orange
ROLLING OR NON-ROLLING?
?
Check your garage door opener motor in your garage for a "LEARN"
or "TRAIN" button by the hanging antenna. If you have one of these,
you have a Rolling Code garage door opener.
3
For Non-Rolling Code
garage door openers, watch for the indicator light to
go constant.
For Rolling Code garage door openers, watch for the indicator light to go from
a slow blink to blinking rapidly.
4
For Rolling Code garage door openers only, firmly push and release the
"LEARN" or "TRAIN" button on your garage door opener motor in your garage,
then push the HomeLink button in your vehicle for two long holds.
®
5
If the programming was successful, your garage door should open and close
with your chosen HomeLink button.
®
For more detailed instructions, see "Universal Garage Door Opener
(HomeLink®)" in your Owner's Manual. Please call 1-800-355-3515 if
you require assistance.