Si011087
Step
Removal Procedure
Procedure
Compressor ASSY
Removal of Compressor ASSY (Pattern 2)
Note:
Do not use a metal saw for
cutting pipes by all means
Suction
pipe
because the sawdust comes
into the circuit.
When withdrawing the pipes,
be careful not to pinch them
firmly with pliers. The pipes
may get deformed.
Provide a protective sheet or
a steel plate so that the
brazing flame cannot
influence peripheries.
Be careful so as not to burn
the compressor terminals,
the name plate, the heat
exchanger fins.
(R17614)
Points
17