Table of Contents
Advertisement
item is placed in the Inbox folder in Messaging.
Messages received through Bluetooth connectivity are
indicated by
.
Tip: If your device notifies you that the memory
is full when you try to receive data through
Bluetooth connectivity, change memory card as
the memory where the data is stored.
Block devices
Select
Menu
Ctrl. panel
>
Bluetooth.
To block a device from establishing a Bluetooth
connection to your device, open the
tab. Scroll to a device you want to block, and select
Options
> Block.
To unblock a device, open the
scroll to a device, and select
To unblock all blocked devices, select
Delete
all.
If you reject a pairing request from another device, you
are asked if you want to block all future connection
requests from this device. If you accept the query, the
remote device is added to the list of blocked devices.
Remote SIM mode
Before the remote SIM mode can be activated, the two
devices must be paired and the pairing initiated from
the other device. When pairing, use a 16-digit
66
passcode, and set the other device as authorised.
and
Connectivity
>
Paired devices
Blocked devices
tab,
Options
> Delete.
Options
>
To use the remote SIM mode with a compatible car kit
enhancement, activate Bluetooth connectivity, and
enable the use of the remote SIM mode with your
device. Activate the remote SIM mode from the other
device.
When the remote SIM mode is on in your device,
Remote SIM mode
is displayed in the standby mode.
The connection to the wireless network is turned off,
as indicated by
in the signal strength indicator area,
and you cannot use SIM card services or features
requiring cellular network coverage.
When the wireless device is in the remote SIM mode,
you can only use a compatible connected
enhancement, such as a car kit, to make or receive calls.
Your wireless device will not make any calls while in
this mode, except to the emergency numbers
programmed into your device. To make calls from your
device, you must leave the remote SIM mode. If the
device is locked, enter the lock code to unlock it.
To leave the remote SIM mode, press the power key,
and select
Exit remote SIM
Data cable
To avoid corrupting data, do not disconnect the USB
data cable during data transfer.
Transfer data between your device and a PC
1. Insert a memory card in your device, and connect
the device to a compatible PC with the data cable.
mode.
Advertisement
Table of Contents
