Table of Contents
Advertisement
WLAN settings
SelectMenu
Ctrl. panel
>
Connection
Wireless
>
To have an indicator displayed when there is a wireless
LAN (WLAN) available in your current location, select
Show WLAN availability
To select the interval for your device to scan for
available WLANs, and to update the indicator, select
Scan for
networks. This setting is not available unless
you select
Show WLAN availability
To set the device to test the internet capability of the
selected WLAN automatically, to ask for permission
every time, or to never perform the connectivity test,
select
Internet connectivity test
automatically,
Ask every
select
Run automatically
performed when the device asks for it, and the
connectivity test is performed successfully, the access
point is saved to internet destinations.
To check the unique media access control (MAC)
address that identifies your device, enter
*#62209526# in the home screen. The MAC address is
displayed.
Advanced WLAN settings
Select
Options
>
WLAN settings are normally defined automatically, and
changing them is not recommended.
To edit the settings manually, select
140
configuration
> Disabled, and define the following:
Settings
and
>
LAN.
> Yes.
> Yes.
Run
>
time, or
Never
run. If you
or allow the test to be
Advanced
settings. The advanced
Automatic
Long retry limit
— Enter the maximum number of
•
transmission attempts if the device does not receive
a receiving acknowledgement signal from the
network.
Short retry limit
— Enter the maximum number of
•
transmission attempts if the device does not receive
a clear-to-send signal from the network.
RTS threshold
— Select the data packet size at
•
which the WLAN access point device issues a request
to send before sending the packet.
TX power level
— Select the power level of your
•
device when sending data.
Radio measurements
•
radio measurements.
Power saving
— Select whether to use the WLAN
•
power saving mechanism to save the power in the
device battery. Using the power saving mechanism
enhances the battery performance but may weaken
WLAN interoperability.
To restore all settings to their original values, select
Options
Restore
defaults.
>
WLAN security settings
Select
Menu
Ctrl. panel
>
Connection
Destinations
>
follow the instructions on the display.
To edit a wireless LAN (WLAN) access point, open one
of the access point groups, and select an access point
marked with
.
To enter the settings for the selected security mode,
select
WLAN security
settings.
— Enable or disable the
Settings
and
>
Access
point, and
>
Advertisement
Table of Contents
