Table of Contents
Advertisement
With Device manager, you can manage settings, data,
and software on your device remotely.
You can connect to a server, and receive configuration
settings for your device. You may receive server profiles
and different configuration settings from your service
providers or company information management
department. Configuration settings may include
connection and other settings used by different
applications in your device. The available options may
vary.
The remote configuration connection is usually started
by the server when the device settings need to be
updated.
To create a new server profile, select
Server profiles
>
You may receive these settings from your service
provider in a configuration message. If not, define the
following:
Server name
•
server.
Server ID
— Enter the unique ID to identify the
•
configuration server.
Server password
•
your device to the server.
Access point
•
the connection, or create a new access point. You
can also choose to be asked for the access point
every time you start a connection. This setting is
available only if you have selected
bearer type.
Host address
•
configuration server.
124
Port
— Enter the port number of the server.
•
Options
Options
New server
>
— Enter a name for the configuration
— Enter a password to identify
— Select the access point to use for
Internet
— Enter the web address of the
User name
•
password for the configuration server.
Allow configuration
•
server to initiate a configuration session.
Auto-accept all requests
•
not want the server to ask for your confirmation
when it initiates a configuration session.
Network authentication
•
http authentication.
Network user name
•
password
the http authentication. This setting is available
only if you have selected
authentication
>
To connect to the server and receive configuration
profile.
settings for your device, select
configuration.
To view the configuration log of the selected profile,
select
Options
To update the device software over the air, select
Options
>
erase your settings. When you receive the update
package on your device, follow the instructions on the
display. Your device is restarted once the installation is
complete. Downloading software updates may involve
the transmission of large amounts of data (network
service). Make sure that the device battery has enough
power, or connect the charger before starting the
update.
as the
Warning: If you install a software update, you
cannot use the device, even to make emergency calls,
until the installation is completed and the device is
and
Password
— Enter your user ID and
— Select
Yes
— Select
— Select whether to use
and
Network
— Enter your user ID and password for
Network
to be used.
Options
View
log.
>
Check for
updates. The update does not
to allow the
Yes
if you do
Start
>
Advertisement
Table of Contents
