Long Range Mode - Leupold RX Operating Instructions Manual

When you initially push the Power button, the unit is ready for scanning. When
you first press the Mode button, the Quick Set Rotary Menu is prepared for
™
navigation. To set or activate a function, you must advance the mode selector
to that function by pressing the Mode button until that function is flashing by
itself. To lock in that function, press the Set button if using a RX-III or RX-IV;
press the Power button if using a RX-I or RX-II.
NOTE:
Activating certain modes automatically disables other modes. For
example, 1st Target and Last Target Mode work in an opposite way, so when
one is activated the other is automatically turned off to ensure proper ranging
function. Long Range and Rain Mode can be on at the same time.
FUNCTION 1: LONG RANGE MODE
This mode is used when you want the rangefinder
to range only those items beyond 150 yards. If you
are ranging targets closer than 150 yards, turn the
Long Range Mode off.
7