Leupold RX Operating Instructions Manual page 17

incredible accuracy, eliminating potential errors that could cause you to
miscalculate your aiming point. The first step in correctly using TBR is Practice,
Practice, Practice. Anytime you handle a firearm or bow, you are ultimately
responsible for where your projectile ends up.
The inclinometer output is shown below the LOS
output or thermometer, whichever is enabled. The
inclinometer output will be disabled when TBR is
turned off.
For rifle hunters, adjustment or holdover information
can also be displayed. The available settings are as
follows: MOA displays the minute of angle to adjust for, HOLD displays the
inches or centimeters to holdover the aiming point, and BAS outputs the
equivalent range to use with Leupold's Ballistic Aiming System reticles or the
distance to shoot at if holding over. TBR for rifle settings is effective to 800
yards for most cartridges.
For rifle users, when TBR mode is selected by pressing Set or Power on RX-II,
the upper TBR output display will begin to flash, scrolling through three
15