Table of Contents
Advertisement
HP 16532A - General Information
SETUP AIDS
Autoscale:
Presets:
Calibration:
Probe Compensation Source:
OPERATING ENVIRONMENT
Temperature:
Humidity:
Altitude:
Vibration
Operation:
Non-operating:
1-8
Table 1-2. HP 16532A Operating Characteristics (cont.)
Autoscales the vertical and horizontal ranges, offset, and trigger level to display
the input signals. Requires a frequency between 50 Hz and 250 MHz.
Scales the vertical range, offset, and trigger level to predetermined values for
displaying ECL or TTL waveforms.
Vertical, trigger, delay, and all defaults. Calibration factors stored in NV-RAM on
the circuit board.
External BNC supplies a square wave approximately 0.0 mV to -800 mV into the
open circuit at approximately 1000 Hz.
Instrument, 0° to 55° C (+ 32° to 131° F). Probes and cables, 0° to 65° C (+ 32°
to 149° F).
Instrument, up to 95% relative humidity at + 40° C (+ 104° F). Recommended
disk media, 8% to 80% relative humidity at + 40° C (+ 104° F).
To 4600 m (15,000 ft).
Random vibration 5-500 Hz, 10 minutes per axis, ~ 0.3 g (rms).
Random vibration 5-500 Hz, 10 minutes per axis, ~ 2.41 g (rms); and swept
sine resonant search, 5-500 Hz, 0.75 g (0- peak), 5 minute resonant dwell @ 4
resonances per axis.
Advertisement
Table of Contents
