Removing and replacing a FRU
1070 Mini PCI adapter for wireless LAN
For access, remove these FRUs in order:
v "1010 Battery pack" on page 73
v "1040 Palm rest or palm rest with fingerprint reader" on
page 79
v "1060 Keyboard" on page 82
In steps 2a and 2b , unplug the jacks by using the
removal tool antenna RF connector (P/N: 08K7159), or
pick the connectors with your fingers and gently unplug
them in the direction shown by the arrow.
1
When installing:
1. Plug the gray cable 2a into the jack labeled MAIN on
the card, and the black cable 2b into jack AUX.
2. Insert the notched end of the card into the socket, and
then press the card firmly. Pivot the card until it snaps
into place. Make sure that it is firmly fixed in the slot
and does not move easily.
84
MT 2529, 2530, 2531, 2532
3
2a
2b
1