Lenovo ThinkPad Z60m 2529 Hardware Maintenance Manual page 60

Product overview
Key
combination
Fn+F8
Fn+F9
Fn+F10
Fn+F11
Fn+F12
(continued)
56
MT 2529, 2530, 2531, 2532
Description
Change the settings of the TrackPoint and the
touch pad.
Open the ThinkPad EasyEject Utility screen.
Buttons for the following choices are displayed:
v Eject ThinkPad PC from Dock: This button
is displayed only if the ThinkPad computer
has been attached to a ThinkPad Advanced
Dock or a ThinkPad Advanced Mini Dock.
The computer can be detached from the
ThinkPad Advanced Dock or the ThinkPad
Advanced Mini Dock.
v Eject ThinkPad PC from Mini Dock: This
button is displayed only if the ThinkPad
computer has been docked in a ThinkPad
Advanced Mini Dock and one or more USB
devices have been connected to the
ThinkPad Advanced Mini Dock. You can stop
and remove all the USB devices safely by
clicking the button.
Note: If a diskette drive is connected to the
external-diskette-drive connector of the
ThinkPad Advanced Mini Dock, you cannot
connect a USB diskette drive.
v Run EasyEject Actions: This button is used
to select, stop, or remove external devices
connected to the ThinkPad computer.
v Configure EasyEject Actions: Opens the
ThinkPad EasyEject Utility main window.
v Fn+F9 Settings: Configures the settings for
the Fn+F9 function.
You can use this utility to stop and remove all
ejectable devices connected to the ThinkPad
computer, the ThinkPad Advanced Mini Dock,
or the ThinkPad Essential Port Replicator. You
cannot use it to detach the computer from the
ThinkPad Advanced Mini Dock or the ThinkPad
Essential Port Replicator.
Note: This function is supported only in
Windows 2000 and Windows XP.
Reserved.
Reserved.
Put the computer into hibernation mode. To
return to normal operation, press the power
button for less than four seconds.
Note: To use Fn+F12 for hibernation in
Windows 2000 or Windows XP, you must have
the PM device driver installed on the computer.