Step
Screw (quantity)
3
M2 × 5 mm, flat-head,
nylon-coated (2)
4
M2 × 5 mm, flat-head,
nylon-coated (2)
In step 6 , release the antenna cables from the cable
guides.
Notes:
1. Route the antenna cables along the cable guides.
When you route the cables, do not tense them. To do
so, the cables may get damaged by the cable guides
of the frame, and may cause a broken wire.
2. Make sure that the connector 5 is attached firmly.
(continued)
Removing and replacing a FRU
4
3
3
5
4
6
Color
Black
Black
ThinkPad Z60m
Torque
0.196 Nm
(2.0 kgfcm)
0.296 Nm
(3.0 kgfcm)
101