1040 Palm rest or palm rest with
fingerprint reader
For access, remove this FRU in order:
v "1010 Battery pack" on page 73
Notes
In models with the fingerprint reader, the sensor has
been attached to the palm rest FRU as the child
part. If the fingerprint reader has any defects and
needs to be replaced, you need to replace the palm
rest by the procedures given in this section. These
procedures are the same for a palm rest with or
without a fingerprint reader.
1
Step
Icon
1
(continued)
1
Screw (quantity)
M2 × 17 mm, flat-head,
nylon-coated (4)
Removing and replacing a FRU
1
Color
Black
ThinkPad Z60m
1
Torque
0.196 Nm
(2.0 kgfcm)
79