Omron NA Series Practices Manual page 20

automatically reported to the NA.
３-４-２ Variable Mapping Procedure
1.
Double-click [Configurations and
Setup]-[Variable Mapping].
2.
The controllers that exist within the
project appear on the table.
When you click the arrowhead to
the left of "NJ_1", the categories of
the variables defined for the NJ_1
controller appear.
3.
Subsequently, when you click the
arrowhead to the left of "User
Variables", you can confirm the
variables defined as global
variables.
4.
Perform variable mapping for all the
user variables.
Select all the variables from "ALM1"
to "Start" and then right-click on the
rows to select "Create Device
Variable".
5.
The NA variables are now created.
The names of the variables are
specified as "Controller name_NJ
variable name".
20