Table of Contents
Advertisement
Removing and replacing a FRU
1020 Hard disk drive
Attention
v Do not drop or apply any shock to the hard
disk drive. The hard disk drive is sensitive to
physical shock. Incorrect handling can cause
damage and permanent loss of data.
v Before removing the drive, have the user make a
backup copy of all the information on the drive if
possible.
v Never remove the drive while the system is
operating or is in suspend mode.
For access, remove following FRU:
v "1010 Battery pack" on page 77
Step
Screw (quantity)
1
M3 × 4 mm, nylon-coated (1)
When installing: Make sure that the hard disk is
78
MT1864/1865/2525/2526/2527/2528
1
connected firmly.
3
Torque
0.245 Nm
(2.5 kgfcm)
2
Advertisement
Table of Contents
