Lenovo ideapad 120S-11IAP/Lenovo ideapad 120S-14IAP
Hardware Maintenance Manual
1020 Hard disk drive (Lenovo ideapad 120S-11IAP (with HDD))
For access, remove this FRU:
• "1010 Base cover" on page 32
Figure 2. Removal steps of hard disk drive (Lenovo ideapad 120S-11IAP
(with HDD))
Unplug the battery connector in the direction shown by arrow 1. Remove the
screws 2, then remove the hard disk drive in the direction shown by arrow 3.
When installing: Make sure that the connectors are attached firmly.
Remove the HDD bracket in the direction shown by arrow 4.
34
Attention:
• Do not drop the hard disk drive or apply any physical shock to it. The hard
disk drive is sensitive to physical shock. Improper handling can cause damage
and permanent loss of data.
• Before removing the drive, suggest the customer to backup all the information
on it if possible.
• Never remove the drive while the system is operating or is in suspend mode.
Step
Screw (quantity)
M2.0 × 3.0 mm, Phillips head, nylok-coated (4)
2
HDD + C cover
4
3
1
Color
Torque
Black
2.0±0.2 kgf*cm
4