1020 Hard Disk Drive, Cable And Bracket (For 38 W Built-In Battery Model) - Lenovo K14 Gen 1 Hardware Maintenance Manual

Applying labels to the base cover assembly
Notes:
• Depending on the country or region of delivery, the labels might be slightly different from the ones in the
following illustration.
• The new base cover assembly FRU is shipped with a kit containing labels of several kinds. Apply those
labels when you replace the base cover assembly. For the labels that are not shipped with the new base
cover assembly, peel them from the old base cover assembly, and adhere them to the new one.
1
GEO label
3
Asset tag label
5
GML label
7
COA label

1020 Hard disk drive, cable and bracket (for 38 W built-in battery model)

For access, remove this FRU:
• "1010 Base cover assembly" on page 60
Attention:
• Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to
physical shock. Improper handling can cause damage and permanent loss of data.
• Before removing the drive, suggest the customer to backup all the information on it if possible.
• Never remove the drive while the system is operating or in suspend mode.
2
Lenovo ATS label
4
Country label
6
S/N label
.
Chapter 8 Removing or replacing a FRU
61