Sennheiser SK 2000 Instruction Manual page 15

Using the bodypack transmitter
The current state of the muting function or the RF signal is displayed on
the display panel of the bodypack transmitter.
An additional display of the muting function appears on the
receiver's display panel when
• the pilot tone function is activated on both bodypack trans-
mitter and receiver
and, in addition,
• this display has been activated via the "Warnings" menu item
on the receiver (see the instruction manual of the receiver).
Audio signal is muted
Transmitter's display panel:
Receiver's display panel:
* only when activated on the receiver (see above)
Audio signal is activated (muting is deactivated)
Transmitter's display panel:
Receiver's display panel:
RF signal is deactivated
Transmitter's display panel:
Receiver's display panel:
* only when activated on the receiver (see above)
RF signal is activated
Transmitter's display panel:
Receiver's display panel:
14
MHz
543.200
**2000**
P
MUTE
AF
"MUTE"
TX Mute" is displayed
"MUTE"
"TX Mute" is not displayed
Transmission icon
"MUTE"
"RF Mute" is displayed
Transmission icon
"RF Mute" is not displayed
is displayed
*
is not displayed
is not displayed,
is displayed
*
is displayed