Table of Contents
Advertisement
Solving Problems
Operations are Slow
Printing Is Too Slow
The following causes can be considered.
Unnecessary applications are running.
Solutions
Close any unnecessary applications on your computer or smart device.
The printer is in sleep mode.
Solutions
When the printer is in sleep mode it needs to warm up before you can start printing; therefore it may take
some time before paper is ejected.
The printer is performing adjustments.
Solutions
To maintain optimum print quality, the printer may stop printing to automatically adjust some internal
features. The printer automatically restarts printing when adjusting is complete.
A setting that takes some time to process is selected such as thick paper.
Solutions
When printing on plain paper, set the paper type setting to Plain paper.
The printer is cooling the fuser unit.
Solutions
When continuously printing on narrow paper, the printer needs to cool the fuser unit to prevent it from
overheating which may slow down printing. Wait until printing is complete.
The print data size is too large.
Solutions
If you are printing a large data size image, the data may not be processed depending on the CPU or
memory of the computer. Try the following solutions.
❏ Install more memory in your computer if you can.
❏ Set the printer driver's Quality setting to Fast (300dpi).
❏ Set interfaces that you are not using to disabled.
The printer is refreshing the drum.
Solutions
Wait until the printer has finished. If you set Drum Heater to On in Settings >General Settings >
System Administration > Printer Adjust Menu, it reduces the frequency of drum refresh.
>
>
Cannot Print
Cannot Operate the Printer as Expected
121
Advertisement
Table of Contents
