La Crosse Technology WS-9014TWC Instruction Manual page 10

B.
INDOOR TEMPERATURE
STATION
Note: After the batteries are installed, DO
NOT press any buttons. This may interfere
with the signals, causing temperatures to
register incorrectly.
1.
Remove the battery cover on the
backside. To do
this, push up and
pull out.
2.
Observing the
correct polarity,
install 2 AA
batteries.
3.
Replace battery
cover.
4.
Wait 10 minutes
or until both the indoor and outdoor
temperatures are shown on the indoor
temperature station.
10