Program Mode; Time Setting (Wwvb & Manual) - La Crosse Technology WS-7059U4 Instruction Manual

PROGRAM MODE

Programming Note: If 20 seconds is allowed to pass
during programming modes the unit will confirm/set the
last information entered—the display will stop flashing
and return to normal time-date readings. If for program
settings IV through XI, you don't leave the program mode
you can advance to step 3 of the following program
setting. If you do leave the program setting (or want to
program a specific setting) follow each step in the
program settings instruction.
Function Keys:
II. TIME
There are two methods by which the time can be set:
1) Automatically via WWVB reception
2) Manually (see section III)
WWVB (Remote Control Time)
This method requires you to do nothing but wait for the
signal to be received, and to select a time zone.
Reception usually takes approximately 6-8 minutes during
optimal conditions. The best conditions for reception is at
night, between midnight and 6:00 am, when there is less
atmospheric interference. To keep your time as accurate
as possible, the Weather Station conducts a WWVB
search every night between these hours, and overrides any
time that has been set manually. The WWVB tower icon
5