Mounting - La Crosse Technology WS-7059U4 Instruction Manual

V. MOUNTING
Note: Before permanently mounting ensure that the Indoor
Temperature Station is able to receive WWVB signals from the
desired location. Also, extreme and sudden changes in
temperature will decrease the accuracy of the Weather Station,
and changes in elevation will result with inaccurate weather
forecasting for the next 12 to 24 hours. These changes will require
a 12 to 24 hour wait before obtaining reliable data. Also, be sure
reception of any outdoor sensors is good before mounting.
The Indoor Temperature Station can be mounted in two ways:
•
with the table stand or,
•
on the wall with the use of a wall hanging screw (not
included).
A. USING THE TABLE STAND
1. The Indoor Temperature Station comes with
the table stand already mounted. If you
wish to use the table-stand all that is
required is to place the Indoor Temperature
Station in an appropriate location.
B. WALL MOUNTING
1. Remove the table-stand. To do this, pull
down on the stand from the rear and rotate
forward.
data was recorded. Pressing this
button a second time will display
the same data for the maximum
recordings.
20