Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for La Crosse Technology WS-7034U
Summary of Contents for La Crosse Technology WS-7034U
- Page 1 WS-7034U Wireless 433 MHz Temperature Station Instruction Manual...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Topic Page Quick Setup Inventory of Contents Detailed Setup Guide Battery Installation Setting the Time 9-10 Selecting Units of Measurement Features Minimum and Maximum Temperatures Resetting Minimum and Maximum Temperatures Adding additional remote 13-14 temperature sensors (optional) Mounting 15-16 Troubleshooting... -
Page 3: Quick Setup
QUICK SETUP Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor temperature station and remote temperature sensor 3 to 5 feet apart. 2. Batteries should be out of both units for 10 minutes. 3. Place the batteries into the remote temperature sensor first then into the indoor temperature station. - Page 4 In this time the indoor temperature station and remote temperature sensor will start to talk to each other and the display will show both the indoor temperature and an outdoor temperature. If the indoor temperature station does not display both temperatures after the 10 minutes please retry the set up as stated above.
- Page 5 of resistance. Your distance plus resistance should not exceed 80 ft. in a straight line. NOTE: Fog and mist will not harm your remote temperature sensor but direct rain must be avoided. To complete the set up of your indoor temperature station after the 10 minutes have passed please follow the steps on pages 8-9.
-
Page 6: Inventory Of Contents
INVENTORY OF CONTENTS The indoor temperature station (Figure The remote temperature sensor (TX6U) and mounting bracket. (Figure 2) 3 each, 1/2” Philips screws. One strip of double sided adhesive tape. Instruction Manual and Warranty Card. Figure 1 Holder Figure 2... - Page 7 ADDITIONAL EQUIPMENT (not included) 1 Philips screwdriver. 2 Fresh AAA Alkaline batteries. 2 Fresh AA Alkaline batteries...
-
Page 8: Detailed Setup Guide
DETAILED SETUP GUIDE Battery Installation Install 2 AA batteries in the remote temperature sensor. Make sure they do not spring free, or start-up problems may occur. Install 2 AAA batteries in the Battery indoor temperature Cover station. Do not press any buttons for at least ten minutes. - Page 9 Press and hold the “SET” button for 5 second, “12h” will appear in the TIME LCD. Press and release the “MIN/MAX” button to select either 12h time (am/pm) or 24h time Press and release the “SET” button 2 times, the hour will flash in the upper left corner.
-
Page 10: Selecting Units Of
Selecting Units of Measurement Press and hold the “SET” button for 5 second until “12h” or “24h” appears in the TIME LCD. Press and release the “SET” button again, “°F” will appear in the TIME LCD. Press and release the “MIN/MAX” button to shift between °F and °C. -
Page 11: Features
FEATURES Minimum and Maximum Temperatures Press and release the “MIN/MAX” button, “MIN” appears next to the indoor and remote temperatures. The recorded minimum temperature is displayed. The time of the minimum outdoor temperature will also flash. Press the “MIN/MAX” button, “MAX”... - Page 12 Resetting Min and Max Temperatures To reset both the minimum and maximum temperatures—press and hold the “RESET/+” button for 4 seconds.
-
Page 13: Adding Additional Remote
Adding Additional Remote Temperature Sensors (optional) The WS-7034U is able to receive signals from 3 different remote temperature sensors. Following are some brief instructions for the basic set-up of remote temperature sensor units with the WS-7034U. These extra remote temperature sensors can be purchased... - Page 14 indoor temperature station and do not press any buttons for ten minutes. Transmission problems will arise if this is not done correctly. To view the temperature of a different remote temperature sensor unit, press and release the “SET/CH” button. A shift from one number to the next should be observed in the OUTDOOR LCD.
-
Page 15: (Optional) Mounting
MOUNTING Note: To achieve a true temperature reading, avoid mounting in direct sunlight. We recommend that you mount the remote temperature sensor on a North-facing wall. The sending range is 80ft; obstacles such as walls, concrete, and large metal objects will reduce the range. -
Page 16: Indoor Temperature Station
Indoor Temperature Station The indoor temperature station comes with the table stand already mounted. If you wish to use the table-stand all that is required is to place the indoor temperature station in an appropriate location. To wall mount the indoor temperature station first remove the table stand. -
Page 17: Troubleshooting
TROUBLESHOOTING NOTE: For problems not solved, please contact La Crosse Technology via e-mail or phone, or visit our website, www.lacrossetechnology.com Problem: The LCD is faint Solution: Replace batteries Problem: No outdoor temperature is displayed. Solution: Remove all batteries, reinsert into remote temperature sensor first, then into the indoor temperature station. -
Page 18: Maintenance And Care
Solution: Each temperature sensor is manufactured to be accurate to within 1 degree plus or minus and under normal conditions, so two sensors could be as much as 2 degrees different. However, the difference can be exaggerated further because the sensors are designed for different working environments. - Page 19 Do not submerge in water. • Do not subject the units to unnecessary heat or cold by placing them in the oven or freezer. • Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La Crosse Technology repairs.
-
Page 20: Specifications
SPECIFICATIONS Transmitting 433MHz Frequency Measuring Temperatures Indoor 32°F to 156.2°F with 0.2 °F resolution. Temperature Station (0°C to 69.0°C with 0.1°C resolution). -21.8 °F to 156.2°F with Remote Temperature 0.2°F resolution. Sensor (-29.9°C to 69.0°C with 0.1°C resolution). Temp accuracy +/- 1°F (+/- .5°C). -
Page 21: Warranty Information
Sensor Battery life Approximately 1 year. WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. - Page 22 La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above.
- Page 23 LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT.
- Page 24 Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. For warranty work, technical support, or information contact: La Crosse Technology 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610 Fax: 608.796.1020 e-mail: support@lacrossetechnology.com...
- Page 25 (2) this device must accept any interference received, including interference that may cause undesired operation. Freq. 433.92 MHz La Crosse Technology Made in China WS-7034U FCC ID: OMO-01RX (Receiver), OMO-01TX (sensor) THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS...