Page 1
COSTWAY PATIO丿OY USER'S MANUAL 5 Pcs Dining Set HW64411 THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE FLOOR AREA Please g ive us a chance to make it ri g ht and do better!
Do NOT return this item. Contact our friendly customer service department for help first. E-mail US: cs_u,;@cost.com UK: cs.uk@costway.com Before You Start 多 心 Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur.
COSTWAY Board Identification Not actual size Right Arm x4 Left Arm x 4 Back x 4 Seat x 4 Cushion x 4...
Page 4
COSTWAY Board Identification Not actual size...
Page 5
COSTWAY Hardware List Actual size @ 一 圈 M6 x 3 5mm @ BOLT WASHER ALLEN WRENCH...
Page 6
COSTWAY STEP 1 Attach the seat(D) to the arm (B) by inserting bolts (L) with washers (M) through the pre-drilled holes on the seat into the pre-welded nuts on the arm. Repeat step for the other side arm(A) IMPORTANT:Do not tighten completely until...
Page 7
STEP 2 Attach the back(C) to the arm (A&B) by inserting bolts (L) with washers (M).
Page 8
COSTWAY STEP 3 Tighten all the bolts with the allen wrench, and turn the chair to the upright position. place the cushions(S) onto the chair seat. Your chair is now ready for use.
Page 13
COSTWAY STEP 1 Attach the table frame (E) to the table frame (F) by inserting bolts (K) with washers (M),nuts(N). IMPORTANT:Do not tighten completely until assembly is completed.
Page 14
COSTWAY STEP 2 Attach the table leg (G) to the table frame (E&F) by inserting bolts (」) with washers (M). Insert adjustable levellers(Q) to bottom of each table leg(G) by turning clockwise until secure. Adjust height as desired. Q -- 一 千...
Page 15
COSTWAY STEP 3 Attach the leg brace (H) to the table leg(G) by inserting bolts (K) with washers (M).
Page 16
COSTWAY STEP4 Attach the Rubber Spacer (I) to the table frame(E&F).
Page 17
COSTWAY STEP 5 Tighten all the bolts with the allen wrench, and turn the table to the upright position. Put the glass on the the table frame. Your table is now ready for use.