Table of Contents
Advertisement
¡ Installation takes a few minutes. You cannot use
your appliance during installation.
16.5 Remote diagnostics
Customer Service can use Remote Diagnostics to ac-
cess your appliance if you contact them, have your ap-
pliance connected to the Home Connect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.
Tip: For further information and details about the avail-
ability of Remote Diagnostics in your country, please
visit the service/support section of your local website:
www.home-connect.com
17 Basic settings
You can configure the appliance to meet your needs.
17.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Basic setting
Language
Clock
Date – day
Date – month
Date – year
Water hardness
Signal tone
Volume
Button tone
Display brightness
Clock display
Lighting
Childproof lock
1
Factory setting (may vary according to model)
Selection
See selection on the appli-
ance.
Clock in 24-hour format.
Sets the current day
Sets the current month
Sets the current year
0 (softened)
1 (soft)
2 (medium)
3 (hard)
1
4 (very hard)
Short cooking time
1
Medium cooking time
Long cooking time
Five levels
Switched on
1
Switched off
5 settings
off
1
Digital + date
Analogue
Off during operation
1
On during operation
1
Keylock only
16.6 Data protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the
Home Connect server (initial registration):
¡ Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the Wi-Fi
communication module installed).
¡ Security certificate of the Wi-Fi communication mod-
ule (to ensure a secure data connection).
¡ The current software and hardware version of your
appliance.
¡ Status of any previous reset to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use the Home Connect functions for the first time.
Note: Please note that the Home Connect functions
can only be utilised with the Home Connect app. In-
formation on data protection can be retrieved in the
Home Connect app.
Basic setting
After switch-on
Night-time dimming
Brand logo
Fan run-on
Telescopic rails
Sabbath mode
Home Connect
Factory setting
1
Factory setting (may vary according to model)
17.2 Changing the basic settings
1.
Press
.
2.
Press
.
a The operating modes menu opens.
3.
Select the "Settings" operating mode.
a The first basic setting appears.
4.
Press
to switch between the different settings.
5.
Use the rotary selector to change the basic setting.
6.
Press
.
a The display shows the changes "Save" or "Discard".
7.
Press the required change.
Note: Your changes to the basic settings will be re-
tained even after a power failure.
Basic settings en
Selection
Main menu
1
Types of heating
Steam
Dishes
1
Switched off
Switched on
1
Display
Do not display
1
Recommended
Minimum
1
Retrofitted
Not retrofitted
Switched on
1
Switched off
Home Connect Settings
→ "Home Connect ",
Page 23
Reset
25
Advertisement
Table of Contents
