Rear Panel - Lab.gruppen fP Series FP 2600 User Manual

Lab.gruppen fp series fp 2600: user guide
Hide thumbs Also See for fP Series FP 2600:
Table of Contents

Advertisement

This indicator illuminates if signals above 12 kHz are continuously present at full power at the output
terminals or if short circuit protection is activated. If this occurs the input signal is muted, and the process
cycles until the VHF signal is no longer present or the short is removed. (See page 15)
5. Clip/limit indicator
This indicator signals if the amplifier output is clipping or limiting. It has two different indication states:
If the clip limiter is engaged, it has a short time constant, and it illuminates briefly.
If the clip limiter is not engaged, it has an increased time constant, and it illuminates for a longer period.
(See page 15)
6. Fan grill filters
Two grilles with foam filters are located on the front panel to prevent dust from entering the amplifier. For
easy cleaning of the filters the grilles are removable by simply pulling them off. The foam filters should
always be used.
7. Power switch
Turns mains power on or off. (See page
10
and 14)
QKP= oÉ~ê=m~åÉä=
Figure 2: Rear panel
1. Output / Speaker connector
The Speakon connector from Neutrik® may be unfamiliar to some users. A full description can be found
in the "Connections" section. (See page 13)
2. Minimum load selector (MLS™) switch
This switch is used to select the maximum output power. (See page 8)
3. Clip limiter switch
Turns the clip limiter on or off. (See page 14)
4. Input signal XLR.
Neutrik® Combojack features also ¼" TRS phone jacks. (Pin 2 is "hot", see page 12)
5. Link output
XLR male connector connected in parallel to the female for linking the channel to another input.
6. Gain switch channel B
Three of the switches in the DIP switch selects the maximum gain of the channel to be either 20, 23, 26,
29, 32, 35, 38 or 41dB. (See page 6)
7. Link/Bridge switch
Two of the switches in the DIP switch are used for Link and Bridge operation. (See page 6)
8. Gain switch channel A
R
i~ÄKÖêìééÉå==
=
=
=
=
======================
========================
rëÉê=j~åì~ä===Ñm=OSMM======sÉêëáçå=MKV========OMMPJNMJMT=

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fp 2600

Table of Contents