Power Management Features; Power Requirements; Power Consumption - Contec BX-S959SD Series User Manual

Table 2.2. Installation Environment Requirements
Model
Operating temperature
*4
Storage temperature
Humidity
Floating dust particles
Corrosive gases
Line-noise
Ambient
resistance
specifications
Vibration
resistance
Impact resistance
Grounding
*4 : For more details on this, please refer to chapter 3, "Installation Requirements".
*5 : When AC adapter "ACAP19-01" is used.

Power Management Features

- aSupport both ACPI (Advanced Configuration and Power Interface) .
- ACPI v2.0 compliant
- Hrdware automatic wake-up

Power Requirements

Your system requires a clean, steady power source for reliable performance of the high frequency CPU on the
product, the quality of the power supply is even more important. For the best performance makes sure your
power supply provides a range of 10.8 V minimum to 31.2 V maximum DC power source.

◆Power Consumption

For typical configurations, the CPU card is designed to operate with at least a 60W power supply. The power
supply must meet the following requirements:
- Rise time for power supply: 2 ms - 30 ms
The following table lists the power supply's tolerances for DC voltages:
Table 2.3. DC voltage tolerance
DC Voltage
+ 12V - 24V
16
BX-S959SD-7xxx
0 – 50°C(When using 1000BASE-T : 0 - 45°C)
Please refer to chapter 3, "Installation Requirements" for required conditions.
-10 - 60°C
10 - 90%RH (No condensation)
Not to be excessive
None
AC line /± 2kV
Line noise
Signal line / ±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)
Static
Contact discharge / 4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2)
electricity
Atmospheric discharge / 8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)
resistance
10 - 57Hz/semi-amplitude 0.375 mm 57 - 500Hz/5.0G 60 min. each in x,
Sweep
resistance
y, and z directions (JIS C60068-2-6compliant, IEC68-2-6-compliant)
100G, half-sine shock for 6 ms in x, y, and z directions
(JIS C0041-compliant, IEC68-2-27-compliant)
Class D grounding, SG-FG / continuity
Acceptable Tolerance
+ 10.8V - 31.2V
,
*5
BX-S959SD Series User's Manual
BX-S959SDF2-7xxx