Description Of Product Components; Led: Access, Drive, Power, Hdd, User; Power Switch: Power Sw; Reset Switch: Reset Sw - Contec VPC-1700-G Series Reference Manual

2. Description of Product Components

Components such as connectors, switches are described.

1. LED: Access, Drive, POWER, HDD, User

There are seven LEDs on the front of this product.
LED name State (Display color)
Access LED
Drive 1 LED
Drive 2 LED
POWER LED
HDD LED
User LED 1
User LED 2
*1 For details, see "LED Status (page90)" in the "Hardware RAID Setup".
*2 The monitoring tool is not yet available in the market.

2. Power Switch: POWER SW

This is the power switch.

3. Reset Switch: RESET SW

The product is equipped with a hardware reset switch. To avoid pressing this switch by mistake, it is
designed to make it harder to press down. Use a fine-tipped object to press the switch.

4. LINE IN Interface: LINE IN

The product is equipped with a connector for line input. You can connect a CD player or other audio
output device to the product, and then record audio to the system or play back audio from LINE
OUT.

5. LINE OUT Interface: LINE OUT

The product is equipped with a connector for line output. As such, headphones or an amplified
speaker can be connected.
—
Product Nomenclature and Function
VPC-1700-G Series Reference Manual
OFF This LED lights up when the hardware RAID is selected. *1
OFF This LED lights up when the hardware RAID is selected. *1
OFF This LED lights up when the hardware RAID is selected. *1
ON (Green) This indicates the product is operating properly. (ON)
ON (Orange) This LED flashes during data transmission. (Flashing)
This LED can light up with the hardware RAID monitoring tool*
OFF
or by command of your software.
This LED can light up with the hardware RAID monitoring tool*
Off
or by command of your software.
—
Display content
- 21 -
2
2