2. Description of Product Components
Components such as connectors, switches are described.
1. LED: Access, Drive, POWER, HDD, User
There are seven LEDs on the front of this product.
LED name
State (Display color)
Access LED
Off
Drive 1 LED
Off
Drive 2 LED
Off
POWER LED
ON (Green)
HDD LED
ON (Orange)
User LED 1
Off
User LED 2
Off
*1 For more details, see the [Hardware RAID Setup] - [LED Status (page89)]..
*2 The monitoring tool is not yet available in the market.
2. Power Switch: POWER SW
This is the power switch.
3. Reset Switch: RESET SW
The product is equipped with a hardware reset switch. To avoid pressing this switch by mistake, it is
designed to make it harder to press down. Use a fine-tipped object to press the switch.
4. LINE IN Interface: LINE IN
The product is equipped with a connector for line input. You can connect a CD player or other audio
output device to the product, and then record audio to the system or play back audio from LINE
OUT.
5. LINE OUT Interface: LINE OUT
The product is equipped with a connector for line output. As such, headphones or an amplified
speaker can be connected.
—
Product Nomenclature and Function
VPC-3100-G Series Reference Manual
This LED lights up when the hardware RAID is selected. *1
This LED lights up when the hardware RAID is selected. *1
This LED lights up when the hardware RAID is selected. *1
This indicated the product is operating properly. (ON)
This LED flashes during data transmission. (Flashing)
This LED can light up with the hardware RAID monitoring
*
2
tool
or by command of your software.
This LED can light up with the hardware RAID monitoring
*
2
tool
or by command of your software.
- 21 -
—
Display content