2 Solution
2.3
Hardware and software components
2.3.1
Validity
•
all S7-1500 CPUs from the SIMATIC product range
•
STEP 7 V17
•
WinCC V17
•
reader of the RF200 (V1.1) family with IO-Link interface
2.3.2
Components used
The application was created with the following components:
Hardware components
Table 2-5
Component
SIMATIC S7-1500
CPU 1513-1PN
SIMATIC PM 1507
24 V
ET 200SP
IM 155-6PN HF
CM 4xIO-Link
SIMATIC RF220R
IOL
Reader cable
RF Transponder
Note
A SIMATIC Basic Panel KTP1000 is not absolutely necessary. For simulating the
user interface, the PC runtime of STEP 7 V17 will be used.
Read/write data with IO-Link
Entry ID: 73565887,
V3.4,
No.
1
6ES7 513-1AL01-0AB0
1
6EP1332-4BA00
1
6ES7155-6AU00-0CN0
1
6ES7137-6BD00-0BA0
1
6GT2821-2BC32
1
6GT2891-0LH50
n
MDS Dxyz
06/2022
Article number
Alternatively, any other
SIMATIC S7-1500 with PN
interface compatible with the
CP can also be used.
Alternatively, any other
voltage supply can also be
used.
Another IO-Link master can
also be used.
Another RF200 IO-Link reader
(V1.0) can also be used.
When using alternative IO-
Link master, the respectively
suitable cables are
documented in \10\.
Alternatively, another
transponder type can also be
used.
Note
12