Contender C990476-101 Assembly Instructions Manual

Parts:
(2) Sides (2) Doors
Back Top
(2) Magnets
(2) Magnetic Catches
Step 1: Step 1: Attach magnetic hardware
to underside of Top Piece (dados side) and
inside top of Doors using pre-drilled holes.
Magnets that are inside plastic case going
underneath Top piece must be facing out-
ward, away from center of Top Piece. Mag-
net Catches use a Small Screw and
Magnets use Magnet Screws.
For assistance, call: Customer Service 1-800-247-8465
C990476-101 ASSEMBLY INSTRUCTIONS
Backsplash
Bottom
Step 2: Insert edge of Bottom, with Bottom
groove facing upwards in direction of hinge,
into mortise of Side. Align Bottom groove
and Side back groove. Insert hex screws
into each of the pre-drilled holes in Side.
(14) Hex Screws
(2) Red Handles
Shelf
Phillips Head Screwdriver
Step 3: Insert edge of Shelf into mortise
of Side. Align back of Shelf flush with
front edge of Side back groove. Front
edge of shelf is rounded and when in-
serted, is edge closest to hinge. Insert
hex screws into each of the pre-drilled
holes in Side.
Allen Wrench
(16) Small Screws
(4) Magnetic Screws
(Not Included)