Table of Contents
Advertisement
Programming
Sub-menu 1
Auto intercom
Caller ID edit
(Caller ID number auto
edit)
Change language
(Display)
Main menu:
"Cust. Support"
Operation
Displaying customer support Web address.
*1
If you program these settings using one of the units, you do not need to program the same
item using another unit.
*2
This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3
This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select "Caller ID auto". To turn this feature off, select
"Manual". (Caller ID subscribers only)
To use this feature, set the date and time first (page 14).
*4
If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to
2). If you select a melody, you cannot distinguish lines by their ringers.
*5
The preset melodies in this product ("Tone 3" - "Melody 10") are used with permission of
© 2004 - 2013 Copyrights Vision Inc.
*6
This setting is available when you have the key detector (KX-TGA20). Read the installation
manual for more information on the key detector.
*7
For models with supplied key detectors, the display shows "1: Detector1".
*8
If you register 2 or more key detectors.
*9
If you subscribe to a Caller ID service and want to view the caller's information after lifting up
the handset to answer a call, turn off this feature.
*10 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary. The setting should stay at "700 ms" unless pressing MFLASHN fails to
pick up the waiting call.
*11 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to "A" if telephone line condition is not good.
For assistance, please visit http://shop.panasonic.com/support
34
TGF242_TG3752USA(en)_1107_ver021.pdf 34
Sub-menu 2
–
–
–
Settings
Code
On
#273
<Off>
<On>
#214
Off
<English>
#110
Español
Code
#680
20
41
14
–
2016/11/07 11:49:49
Advertisement
Table of Contents
