Automatic Malfunction Bypass; Totalrecall; Fact™- False Alarm Control And Test; Smart Prior Intrusion Attempt Alert - Clifford SuperNova Auto Security SuperNova Owner's Manual

Clifford world-class auto security supernova owner's manual
Table of Contents

Advertisement

Automatic malfunction bypass

To provide the utmost protection even if a system component malfunctions, your
SuperNova will automatically bypass the faulty point and arm all other triggers and
sensors to provide the utmost possible protection until you can have the system serviced
by your local Authorized Clifford Dealer.

TotalRecall™

The system's non-volatile memory records the identity of the last activated or
malfunctioning trigger or sensor, which allows your installer to instantly track down a
malfunction and save you substantial servicing costs. To identify the trigger or sensor
held in the system's non-volatile memory, simply perform the following procedure:
1. With the ignition OFF, flick the PlainView valet switch to its latched side.
2. Press button 1 to "arm" the system, then again to "disarm."
3. The LED will blink several times, pause, then repeat the blink cycle 4 times.
4. Count the number of blinks in one cycle and refer to the chart that follows:
Number of LED blinks per cycle
1 blink
2 blinks
3 blinks
FACT™— False Alarm Control and Test
With FACT, you'll never experience repeated false alarms. If your siren goes off, DO
NOT remotely disarm the system while the siren sounds; allow it to run for the full siren
duration. Before sounding the siren a second time, the system automatically checks for
another activated trigger to verify that an intrusion is in progress. Should the siren sound
again, you will know for sure that someone is tampering with your vehicle. (To disable
FACT, see User-selectable features on pages 11–12.)

Smart prior intrusion attempt alert

When you remotely disarm, if you hear 3 chirps instead of the usual one chirp it means
that a trigger or sensor was activated in your absence. When you enter the vehicle and
turn on the ignition, the LED will blink several times, pause, then repeat the blink cycle
4 more times. Count the number of blinks in one cycle and refer to the chart below:
Number of LED blinks per cycle
1 blink
2 blinks
3 blinks

Automatic starter interrupt

Your SuperNova automatically prevents engine starting while the system is armed.
Trigger/Sensor that Last Activated or Malfunctioned
Glass Tampering or Magnetic Resonance sensor
Door trigger
Trunk or hood trigger
Trigger/Sensor Activated
Glass Tampering or Magnetic Resonance sensor
Door trigger
Trunk or hood trigger
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Supernova

Table of Contents