Table Of User-Selectable Features - Clifford intellivoice IQ Vechicle Security Owner's Manual

Feature Select
Row 1
1st momentary
Row 2
2nd momentary
Row 3
3rd momentary
Row 4
4th momentary
Row 5
5th momentary
Row 6
6th momentary
Please Note: There is a column 5 that contains installer-only features; do not change any of these settings. If you accidentally select column 5, turn off the ignition.
Transmit channel 1 (or other channel of your choosing) of the new
NOTE 1:
remote control. You will hear one chirp to confirm programming of channel 1.
Transmit channel 2 (or other channel of your choosing) of the new
NOTE 2:
remote control. You will hear two chirps to confirm programming of channel 2.
Transmit channel 3 (or other channel of your choosing) of the new
NOTE 3:
remote control. You will hear three chirps to confirm programming of channel 3.
Transmit channel 4 (or other channel of your choosing) of the new
NOTE 4:
remote control. You will hear four chirps to confirm programming of channel 4.
Transmit channel 5 (or other channel of your choosing) of the new
NOTE 5:
remote control. You will hear four chirps to confirm programming of channel 5.
When you hear one chirp, all remote controls will have been erased
NOTE 6:
from the system memory. You must now add the new and/or existing remote
controls to the system (i.e., program channels 1–5 of each remote that will be
used with your IntelliVoice-IQ).
The headlight timer starts as soon as you select this feature. When the
NOTE 7:
duration you wish has been reached, press button 1 on the remote control. You
will hear two chirps to confirm the new headlight timer duration.
Table of user-selectable features: 1 chirp = OFF, two chirps = ON.
Column 1
1st latched
Sound 1: on/off Add new remote to channel 1
info on page 15
Sound 2: on/off Add new remote to channel 2
info on page 15
Sound 3: on/off Add new remote to channel 3
info on page 15
Sound 4: on/off Add new remote to channel 4
info on page 15
Sound 5: on/off Add new remote to channel 5
info on page 15
Sound 6: on/off
info on page 15 info on page 19 NOTE 6
DO NOT CHANGE THIS SETTING: it requires installer-only adjustment. Changing the duration may cause damage.
20
Column 2
2nd latched
info on page 8 NOTE 1
info on page 8 NOTE 2
info on page 8 NOTE 3
info on page 8 NOTE 4
this feature is for installers only
info on page 8 NOTE 5
Erase all channels Long-term chirp/voice silencing: on/off
Immediately flip the switch to its latched position, then:
NOTE 8:
a. Enter the new code you wish to use. The system will sound the same number of
chirps as the digit you choose when you move the switch to the latched side (e.g.,
if the first digit is 4, you'll hear four chirps when you press the latched side).
b. Make sure to return the switch to its center position when complete.
c. Wait 3 seconds until you hear 2 chirps, indicating the new code has been
accepted.
d. Turn the ignition off. You'll hear 3 chirps to confirm program mode exit and
the LED will turn off.
e. VERY IMPORTANT: You must immediately test your new secret valet
code: Turn the ignition on, enter your new code, then flip the switch to its
latched position. The LED will illuminate. If it does not, the new code you
programmed and the one you just entered do not match. The system has
reverted to the previous code.
© Copyright Clifford Electronics, Inc., 1994
Column 3
3rd latched
AutoLock on/off
info on page 16
AutoUnLock on/off
info on page 16
FACT: on/off
info on page 13
AutoActivate timed accessory
Set headlight duration 1sec - 2min (30sec)
upon remote arming: on/off
Headlight Reminder: on/off
info on page 15
info on page 15
WARNING:
If you have remote window and sunroof closure,
21
Column 4
4th latched
Enhanced AutoArming: on/off
info on page 10
AutoArm & Lock: on/off
info on page 10
15-second entry delay: on/off
info on page 10
info on page 9 NOTE 7
Siren duration: 60/30 seconds
(1/2 chirps) info on page 15
Set a new secret valet code
info on page 12 NOTE 8
31-714B/IVOM/1194