Ultrasecure Coded Programming Mode; How To Program User-Selectable Features; Programming Table For User-Selectable Features - Clifford concept 50 Owner's Manual

Clifford owner's manual world-class auto security concept 50
Hide thumbs Also See for concept 50:
Table of Contents

Advertisement

UltraSecure Coded Programming Mode

Your Concept 50 vehicle security system allows you to set many of its features to
your own personal preferences. We have made the programming procedures very
simple: to make a change, you just press the PlainView switch a few times. The
system comes from the factory with all of its features pre-programmed as noted in
the table that follows. To change any of the settings, use the procedure noted. To
restore the feature to its factory setting, just repeat the procedure.

How to program user-selectable features

1. Select the feature you wish to program from the table that follows. Note the
number of momentary taps.
2. Turn your vehicle's ignition switch to its "ON" position.
3. Enter your valet code (see page 10).
4. When the LED turns on, immediately tap and release the momentary side of the
switch the number of times indicated in the third column of the programming
table for the feature you selected (after the first three taps, you will hear a single
chirp confirmation each time you tap the momentary side).
a. If noted, perform the "secondary action."
5. Return the switch to its centre position. You will hear 1 chirp and the LED will
turn off. Turn the ignition off.
6. Repeat steps 1-5 for any other features you wish to program.

Programming table for user-selectable features

# of
Factory
Feature
momentary
setting
taps
Lock upon
OFF
4
AutoArming
Arm/Disarm
Chirp
ON
5
Confirmation
See Setting your own secret valet code on page 11.
Valet Code
AutoLock/
ON
7
AutoUnLock
Siren
30 sec.
8
Duration
FACT
ON
9
Program
Secondary
completion
action
confirmation
1 chirp 3
seconds after
last step
1 chirp 3
seconds after
last step
1 chirp 3
seconds after
last step
1 chirp 3
seconds after
last step
1 chirp 3
seconds after
last step
16
Result
Change state from
OFF to ON or vice-versa
Change state from
ON to OFF or vice-versa
+
Change state from
ON to OFF or vice-versa
Change duration from 30 to
60 seconds or vice-versa
Change state from
ON to OFF or vice-versa

Advertisement

Table of Contents
loading

This manual is also suitable for:

50uk

Table of Contents