Table of Contents
Advertisement
Channels 5 of the optional 4-button/12-channel ACG remote
WHAT ABOUT
CHANNEL 5 . . . . . . . .
control is used to remotely engage or disengage the system's
valet mode. See pages 9 and 10 for details.
Optional 4-button/12-channel ACG remote controls
The optional 4-button/12-channel remote control incorporates Anti-CodeGrabbing
(ACG) technology for the ultimate protection against "code-grabbing" devices (see
page 13). The optional ACG remote control can individually command up to 12
different system functions and options. It's like having a TV with 12 channels. You
change channels (functions) with your keychain remote. But instead of putting 12
buttons on the remote, we made it easy: First, the button you use the most — button
1 to arm, disarm, lock and unlock — is larger than the others. Buttons 2, 3 and 4 are
the smaller buttons to the right, below and left of button 1. The LevelShift button on
the side of the remote control allows you to select channels 5–12:
To transmit either channel 1, 2, 3 or 4:
instance, to transmit channel 3, press button 3. While you transmit, the LED
indicator will flash once every second: this indicates level 1.
To transmit either channel 5, 6, 7
Press the LevelShift button
or 8:
once. This shifts buttons 1–4 to
level 2 (channels 5–8). Then press
the desired button within the next
7 seconds. For instance, to
transmit channel 5, press the
LevelShift button once, then press
button 1. While you transmit,
you'll notice that the LED
indicator flashes twice, pauses,
flashes twice, etc.: this indicates level 2.
To transmit channel 9, 10, 11 or 12:
shifts buttons 1–4 to level 3 (channels 9–12). Then press the corresponding
button within the next 7 seconds. For instance, to transmit channel 10, press
the LevelShift button twice, then press button 2. While you transmit, you'll
notice that the LED flashes three times, pauses, flashes three times, etc.: this
indicates level 3.
NOTE: One second after you stop transmitting level 2 or level 3 (channels 5–12),
the remote control automatically returns to level 1 (channels 1–4).
Just press either button 1, 2, 3 or 4. For
Press the LevelShift button twice. This
7
Advertisement
Table of Contents
