Table of Contents Standard Features of the Falcon II ....3 Your Premier 4-button/12-channel remote controls ..6 Optional 4-button/12-channel ACG remotes ..7 Anti-CodeGrabbing (ACG) capability .
Page 3
Table of Contents (cont.) How to interpret the chirps and indicator light flashes . . . 10 FACT — False Alarm Control and Test ... . 10 Smart boot release option .
Standard Features of the Falcon II — Clifford Electronics will repair or replace the control Lifetime Warranty unit and remote controls free of charge for as long as you own the vehicle (see the warranty card for full details). FACT — False Alarm Control and Test innovations, FACT absolutely, positively ends recurring false alarms.
Page 5
Remote Controlled Courtesy Lighting when you remotely disarm your Falcon II, the interior lights turn on and stay on until you start the engine or for 30 seconds, whichever occurs first. — Visually confirms lock and system status.
Page 6
Just a few flicks of a switch lets you match to the system up to 4 different 12-channel Premier or ACG Clifford remote controls. Just as easily, a lost or stolen remote control can be deleted from the system memory.
Obstructions, interference or a weak remote control battery will reduce the range. Your remote control is the key to your Falcon II. You will use it to arm or disarm the system, lock or unlock the doors, activate its panic feature or control options such as a remote boot release or IntelliStart remote engine starter.
Channels 5 of the optional 4-button/12-channel ACG remote WHAT ABOUT CHANNEL 5 ..control is used to remotely engage or disengage the system’s valet mode. See pages 9 and 10 for details. Optional 4-button/12-channel ACG remote controls The optional 4-button/12-channel remote control incorporates Anti-CodeGrabbing (ACG) technology for the ultimate protection against “code-grabbing”...
30 seconds after the vehicle doors are closed. For your convenience, if you re-open any door(s) within the 30-second countdown, AutoArming will restart from the beginning once all doors are closed. Falcon II has these additional AutoArming features: AutoArming enable/disable: the AutoArming feature.
Piezo Sensor The Piezo Sensor detects intrusion-related vibrations and impacts. For an even greater level of security, consider an optional Clifford Glass Tampering Sensor, which detects any attempts to break any of the vehicle windows and/or a Proximity Sensor, which uses radar to detect movement within the passenger compartment...
Valet mode is on, the vehicle can be driven or serviced without having to disarm Flashing High-output siren Your Falcon II siren sounds whenever the system detects an intrusion attempt. It also provides these features: You may silence the arm/disarm chirps until you Long-term chirp silencing: decide to restore them.
3 flashes Smart AutoTesting Your Falcon II automatically tests all triggers and sensors every time you remotely arm. If a trigger is malfunctioning, you will be alerted immediately with 4 chirps and 4 indicator light flashes instead of the usual 2 and 2. If a door* is ajar or the sensor is malfunctioning, you will receive the usual 2 chirps and flashes, then, 5 second later, there will be 4 chirps and 4 flashes.
Selectable starter/ignition interrupt At the time of installation, you can select whether Falcon II interrupts the starter or ignition line. In addition, the interrupt will be set in either Fault-Proof mode, which lets you start the engine even in the unlikely event of a complete system failure, or Super-Security mode that ensures a thief won’t be able to start the engine even if he...
User-selectable features Your Falcon II vehicle security system allows you to set many of its features to your own personal preferences. We have made the programming procedures very simple: to make a change, you just flick the valet switch a few times. The system comes from the factory with all of its features pre-programmed as noted in the table below and on the next page.
Turn the ignition off. That’s all there is to it! Adding new remote controls For other drivers in your family, or if you wish to control Falcon II systems on your other cars with the same remote control, you can buy additional remote controls from any Authorised Clifford Dealer and program them into the system yourself.
Then simply program each remaining and/or replacement remote control as noted in the Adding new remote controls section above. Falcon II is covered by one or more of the following Clifford Electronics USA patents: 4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464; 4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215;...