Chapter 5: Card Bring-Up And Validation; Environment Setup; Running Lspci - Xilinx Alveo U200 Getting Started

Data center accelerator cards
Hide thumbs Also See for Alveo U200:
Table of Contents

Advertisement

Card Bring-Up and Validation
After installing the XRT and deployment platform, the card installation can be verified using the
following commands, which are explained in more detail below.
• lspci
• xbmgmt examine
• xbutil validate
The lspci Linux command is used to confirm the card is seen by the OS.
The additional commands are used to validate and identify the installed card(s) and report
additional card details including memory, PCIe
xbutil
and
xbmgmt
Note: Utility command line help can always be obtained using the --help option.

Environment Setup

Set the environment to use the utilities by running the following command. Note that the
command is dependent on the command shell you are using.
Use the following command in csh shell:
$ source /opt/xilinx/xrt/setup.csh
Use the following command in bash shell:
$ source /opt/xilinx/xrt/setup.sh

Running lspci

UG1301 (v2.2) August 19, 2022
Getting Started with Alveo Accelerator Cards

Chapter 5: Card Bring-Up and Validation

®
, platform name, and system information. See
Send Feedback
Chapter 5
www.xilinx.com
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Alveo u250Alveo u280

Table of Contents