Table of Contents
Advertisement
SECTION 3
3.6
THE WSPC DISPLAY
SCREEN
The WSPC display screen consists of the title bar,
the pull-down menu bar, the compressor status bar,
display tabs, machine operation data display, and the
communication status bar. Refer to Figure 3-9. The
default screen is the Compressor Data display which
appears each time the WSPC software is opened.
Listed below are main elements of the screen display
that enable the user to access and view the machine
operation data, and modify the machine control
parameters.
Title Bar—Contains the name of the WSPC software
program.
"Menu Bar - Click to activate drop-down menus or
other screens to select WSPC configurations.
Section 5 provides additional details.
Connection Button—When activated, establishes
connection between the PC Interface and the WS
Controller unit.
Compressor Status Bar—Located on the left
margin of every display, the Compressor Status Bar
provides real-time data of the machine's current
operation and condition. The Compressor Status Bar
is described in detail in Section 3.7.
Display Tabs—Allow for the selection of the desired
display. Section 4 provides a detailed description of
each display screen.
Machine Operation Data—Area where the machine
parameter data and operational information is
displayed.
Communication Status Indicator—Located at the
bottom of the display window, this line provides
communication status information.
User Profile Name—The name of the current user
profile is displayed. In Figure 3-9, the active profile is
named "Default User".
Logging Indicator—This field will light when the PC
is recording data.
WSPC USER INTERFACE MANUAL
3.7
COMPRESSOR STATUS BAR
The Compressor Status Bar, which is located left of
the main window, displays real-time data regarding
the status of the compressor. The status bar is
constantly displayed whenever the WSPC software
is connected to the controller. This feature allows the
user to quickly view the status of the compressor
operation regardless of which display screen is
active. Information presented in the status bar
includes the compressor operating mode, operating
state, compressor temperature, sump pressure, and
discharge pressure. See Figure 3-9.
The Compressor Status Bar can be displayed as a
stand alone compressor operation monitor as shown
in Figure 3-10. The full display window can be hidden
leaving only the status bar information appearing on
the screen. This feature allows the user to continue
monitoring
the
compressor
performing other tasks on the PC.
To reduce the display to show only the status bar:
1. Place the cursor on the right border of the
WSPC display window.
2. Press and hold the left mouse button.
3. "Drag" the display border to the left until it
stops. The compressor data window will be
hidden leaving the status bar in the display.
4. To return to the full screen presentation, click
on the expand window icon in the upper
right
corner
5. To return again to the status bar only view,
click on the reduce window icon in the upper
right
corner
operation
while
of
the
display.
of
the
display.
17
Advertisement
Table of Contents
