How To Interpret The Chirps And Indicator Light Flashes; How To Interpret The Led Status Indicator; Autoarming; Autoarming Enable/Disable - Clifford concept 50x Owner's Manual

Clifford owner's manual world-class auto security concept 50x
Hide thumbs Also See for concept 50x:
Table of Contents

Advertisement

How to interpret the chirps and indicator light flashes

When you use the remote, the system responds with chirps and indicator light flashes:
Chirps and flashes
1
2
2 and then 4
3
4

How to interpret the LED status indicator

The LED on your car's dashboard or console will inform you of the system status:
LED Condition
Off
On
Flashing
The AutoImmobilizer is engaged and/or the system is armed and protecting your vehicle
Pause between flashes
Either a malfunction (see page 13) or an intrusion was attempted (see page 8)

AutoArming

If this feature is enabled and you forget to remotely arm, the system will automatically
arm itself 30 seconds after you park the vehicle, exit, and close all the vehicle doors. For
your convenience, if you re-open any door(s) within the 30-second countdown,
AutoArming will restart from the beginning once all doors are closed. Concept 50x
has these additional AutoArming features:

AutoArming enable/disable:

the AutoArming feature. See User-selectable features on pages 16-20.

Visual acknowledgment:

the doors, the indicator lights will flash twice to confirm that the AutoArming
countdown is progressing. Then, 25 seconds later, the system will AutoArm.
To ensure you can't accidentally lock your keys inside the
AutoArm & Lock:
car, the system is factory-set not to lock the doors upon AutoArming. To
change this setting, see User-selectable features on pages 16-20.

Instant AutoArming bypass:

and other times when you wish to temporarily bypass AutoArming. To
activate Instant AutoArming Bypass, rapidly turn the ignition switch to "ON"
then "OFF." You will hear a single siren chirp to confirm that the system will
not AutoArm. The system reverts to its normal operating mode when you next
start the engine.
Meaning
Your system is disarmed
Your system is armed
Armed but there is a door open or the sensor is malfunctioning
(see Smart AutoTesting on page 13)
Disarmed but there was an intrusion attempt while you were away
(see Smart prior intrusion attempt on page 8)
Armed but the hood or trunk is ajar (see Smart AutoTesting on page 13)
Meaning
System is disarmed and in normal operating mode
Programming or valet mode.
If you prefer, you may deactivate or reactivate
Five seconds after you exit the vehicle and close all
Prevents AutoArming when fueling the vehicle
9

Advertisement

Table of Contents
loading

Table of Contents