Clifford Arrow 5.1 Owner's Manual page 34

LED : Blue light mounted somewhere in the vehicle. It is used to indi-
cate the status of your system. It is also used to report triggers and
faults in the system or sensors.
Shock Sensor : This is a sensor mounted in the vehicle that is designed
to pick up impacts to the vehicle.
Siren : Noise generating device usually installed in the engine compart-
ment of the vehicle. It is responsible for generating the "chirps" you
hear, as well as the six tones you hear while the alarm is triggered.
Transmitter : Hand-held transmitter which operates the various func-
tions of your system.
This is what happens when the alarm
Trigger or Triggered Sequence:
"goes off" or "trips." The triggered response of your system consists
of the siren sounding and parking light flashing for the programmed
duration.
PlainView 2 Valet Switch : A small two-button switch mounted some-
where inside the vehicle. It is used to override the alarm when a trans-
mitter is lost or damaged, or to enter or exit Valet mode.
Warning Zone Response: Lighter impacts to the vehicle will generate the
Warning Zone response. It consists of several seconds of siren chirps.
Zone : A zone is a separate input that the alarm can recognize as
unique. Each input to the system is connected to a particular zone. Two
or more inputs often share the same zone.
31
© 2 0 0 6 d i re c t e d e l e c t ro n i c s