Setting Of Analog Output Signal Voltage/Current Switchover (Pr. 309) - Mitsubishi Electric 800 Series Instruction Manual

4.4.1

Setting of analog output signal voltage/current switchover (Pr. 309)

Use Pr. 309 Analog output signal voltage/current switchover to select whether to output the same signal or different
signals from terminal AM2 and terminal AM3.
Pr. 309
setting
Description
Same select signals are output from the
0
terminal AM2 and terminal AM3. The
(initial
signal set in Pr. 306 Analog output signal
value)
selection is valid. (The setting of Pr. 310
(10)

is made invalid.)
1 Different select signals are output from
(11) terminal AM2 and terminal AM3.


The same operation is performed for the both settings.
NOTE
• Analog output means current (0 to 20mA) output from terminal AM2 and AM3, and output signal means the monitor
signal (refer to the Instruction Manual (Detailed) of the inverter) set in Pr. 306 and Pr. 310.
26
ANALOG CURRENT OUTPUT
Parameters for setting
Terminal
AM2
Pr. 306 : Select the output signal.
Pr. 307 : Output signal value for zero analog output
Pr. 308 : Output signal value for maximum analog output
AM3
Pr. 310 : Select the output signal.
AM2 Pr. 311 : Output signal value for zero analog output
Pr. 312 : Output signal value for maximum analog output
Pr. 306 : Select the output signal.
AM3 Pr. 307 : Output signal value for zero analog output
Pr. 308 : Output signal value for maximum analog output
Parameters
for
adjustment
Pr. 323
C1 (Pr. 901)
Pr. 324
C1 (Pr. 901)
Pr. 323
C0 (Pr. 900)
Pr. 324
C1 (Pr. 901)