Table of Contents
Advertisement
1.6.2 When performing hardware debugging with target system
Caution
Before turning on the power of the target system, make sure that the power of the IE-V850E-
MC-A is turned on. If the target system is turned on while the IE-V850E-MC-A is off, the target
system or the IE-V850E-MC-A may be damaged.
(1)
Connect interface board to PC
Before connecting, make sure that the power of the PC is off (when using PCI bus).
(2)
Connect option board
(3)
Set clock operation mode of IE-V850E-MC-A
(4)
Set CPU operating voltage range
Switch CPU operating voltage range.
(5)
Connect cables
Connect power source adapter and interface cable.
(6)
Connect IE-V850E-MC-A to target system
There are two connection methods: connecting the connection tab of the option board to the target system
directly, and connecting the connection tab of the option board to the target system via an extension probe
(sold separately).
(7)
Power up IE-V850E-MC-A, then target system
(8)
Start debugger
18
CHAPTER 1 OVERVIEW
3.1 Connection to Personal Computer
Refer to the user's manual of the option board
Refer to the user's manual of the option board
Refer to the user's manual of the option board
3.3 Cable Connections
3.2 Connection to Target System
3.4 System Power-On and Power-Off
3.4 System Power-On and Power-Off
User's Manual U14487EJ2V0UM
Advertisement
Table of Contents
