Table of Contents
Advertisement
9.2.
Remove the AC inlet
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connector (P9).
3. Remove the screws (×2
4. Remove the screw (×1
9.3.
Remove the P(MAIN)-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (P52, P56, P58, P62 and
P64).
3. Disconnect the connectors (P6, P11, P34 and P35).
4. Remove the screws (×5
Board.
) and remove the Inlet metal.
) and remove the AC inlet.
) and remove the P(MAIN)-
9.4.
Remove the P(SUS)-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (P59, P61 and P63).
3. Disconnect the connector (P2).
4. Remove the screws (×4
Board.
9.5.
Remove the P(SUB)-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (P51, P55, P57 and P60).
3. Disconnect the connector (P9).
4. Remove the screws (×4
Board.
26
) and remove the P(SUS)-
) and remove the P(SUB)-
Advertisement
Table of Contents
