Table of Contents
Advertisement
Materials
Dimensions (W × H × D)
Mass
*1 Operation time/charging time
• The battery deteriorates after repeated use, and the operation time eventually becomes short. The figures above are at shipping from the
factory, and are not a guarantee of performance.
*2 Viewing range
• The location of the 3D Eyewear transmitter differs depending on the model of television.
• There are differences in the viewing range of the 3D Eyewear among individuals.
• The 3D Eyewear may not operate correctly at the outside of the viewing range.
Wireless LAN Adaptor
Power supply
Antenna
Interface
Standard Compliance
Transmission system
Frequency Range*1
Transfer rate (standard)*2
Access Mode
Security
Dimensions (W × H × D)
Mass
*1 The frequency and channel differ depending on the country.
*2 Transfer rates are theoretical values; however, actual communication rate will vary according to communication environment or
connected equipment.
Note
• Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
(Within ± 35° horizontal, ± 20° vertical)
Main body: Resin
Lens section: Liquid crystal glass
170.1 mm × 41.2 mm × 169.8 mm
Approx. 39 g Net
DC 5 V (USB powered) 500 mA
Tx 1, Rx 2
USB 2.0
IEEE802.11n / IEEE802.11a / IEEE802.11g / IEEE802.11b
MISO-OFDM system, OFDM system, DSSS system
IEEE802.11n / IEEE802.11a:
5.150 GHz - 5.850 GHz
IEEE802.11g / IEEE802.11b / IEEE802.11n:
2.400 GHz - 2.4835 GHz
IEEE802.11n: Tx Max. 150 Mbps, Rx Max. 300 Mbps
IEEE802.11g / IEEE802.11a: Max. 54 Mbps
IEEE802.11b: Max. 11 Mbps
Infrastructure mode
WPA2-PSK (TKIP/AES)
WPA-PSK (TKIP/AES)
WEP (64 bit / 128 bit)
30.00 mm × 10.72 mm × 94.85 mm
25 g Net
9
Advertisement
Table of Contents
