Remove The Stand Bracket; Remove The K-Board; Remove The S-Board; Remove The V-Board - Panasonic TH-P65VT30A Service Manual

9.17. Remove the Stand bracket

1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Unlock the cable clampers to free cable.
3. Remove the Stand bracket fastening screws (×6
) and the Stand bracket.

9.18. Remove the K-Board

1. Remove the SP shield metal L. (See section 9.15.)
2. Remove the Stand bracket. (See section 9.17.)
3. Remove the screw (×1
4. Remove the claws (×3
5. Disconnect the connector (K1) and remove the K-Board
from the LED panel.
).
).

9.19. Remove the S-Board

1. Remove the SP shield metal L. (See section 9.15.)
2. Remove the screws (×2
3. Disconnect the connector (S10) and remove the S-Board.
, ×4

9.20. Remove the V-Board

1. Remove the SP shield metal R. (See section 9.15.)
2. Remove the Stand bracket. (See section 9.17.)
3. Remove the screw (×1
).
4. Disconnect the connector (V14) and remove the V-Board
from the 3D emitter panel.

9.21. Remove the Handles

1. Remove the SP shield metal (L, R). (See section 9.15.)
2. Remove the screws (×2
dles (L, R).
9.22. Remove the Bottom cabinet
assy
1. Remove the Speakers. (See section 9.15.)
2. Remove the Stand bracket. (See section 9.17.)
3. Remove the K, S and V-Board. (See section 9.18 - 20.)
4. Remove the Handles. (See section 9.21.)
5. Remove the screws (×4
inet assy.
30
).
) and remove the claws (×3
each) and remove the Han-
) and remove the Bottom cab-