Frequency/Voltage Control - Biostar NF500 754 Manual

9 Frequency/Voltage Control

Figure 9. Frequency/Voltage Control
CPU Spec Voltage
The Choices: 1.300V(default)
Hammer Fid Control
This item allows you to set different CPU voltage.
The Choices: StartUp (default), and other choices from X4 800Mhz to X25 5000Mhz.
with an interval of X1 200 Mhz.
Hammer Vid Control
This item allows you to set different CPU frequency.
The Choices: StartUp (default), and other choices from 1.725V to 0.900V, with an
interval of 0.025V.
DDR Voltage Regulator
This item allows you to set different DDR voltage.
The Choices: Default(default), 2.70V, 2.80V, 2.90V.
Note: Please refer to AMD CPU version.
NF500 754
29