Table of Contents
Advertisement
3 Troubleshooting
3.1 To display the error code on the wireless remote controller
3.2 To reset the error code via remote controller
3.3 To reset the error code via outdoor unit
3.4 To perform a test run
RXJ20~50A + FTXJ-A(W)(S)(B)
Split Emura 3 R32
ESIE22-04 – 2022.04
1 Press
to enter the main menu and navigate to the wireless remote control
settings menu using
Wireless remote control setting menu Software version (self-diagnosis menu)
2 Press
to enter the menu.
3 Navigate to the software and version screen using
4 Keep
pressed for at least 5 seconds to enter the self-diagnosis menu.
5 Navigate to the error code indication screen using
confirm your selection.
Error code indication
6 Aim the wireless remote control at the unit and scroll through the list of error
codes using
and
Result: A long beep indicates the corresponding error code.
7 Press
to return to the home screen or press
diagnosis menu.
Prerequisite: Problem is solved.
1 Press the ON/OFF button of the remote controller to reset the error.
Prerequisite: Problem is solved.
1 Perform a power reset to reset the error code.
INFORMATION
If the unit runs into an error during commissioning, see the service manual for the
detailed troubleshooting guidelines.
and
.
, until you hear a long beep.
draft – 22/04/2022 08:50
3
|
Troubleshooting
and
.
and
. Press
Error code list
1
00
to return to the self-
Service manual
to
13
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
