B&B Electronics 232BSS4 Manual page 29

Buffered smart switch

Hide thumbs Also See for 232BSS4:

Table of Contents

Load Configuration:

View Module Configuration:

Configure Switch:

NOTE: Once changes are saved to the switch they cannot be reset

Documentation Number 232BSS41202 Manual

Downloaded from

Elcodis.com

electronic components distributor

The parameters for Unit #1 are automatically loaded when the

Back-to-Back main screen is entered. Unit #2 is loaded the first

time the Unit #2 tab is selected. The user should not have to

reload the configuration except when the parameters need to be

reset to those already saved in the switch. The load

configuration button will load the configuration from the

connected switch and assume these apply to the selected Unit.

Each unit's configuration can be reviewed on one screen by

selecting the appropriate tab and clicking the View Module

Configuration button. Any changes from what was read from the

switch will be shown in red. The page can then be printed to the

default Windows printer for review or for attachment to the

switch.

Before exiting the program, all changes should be saved to the

switches. The parameters will be saved to the connected switch.

Care should be taken to ensure that the correct Unit is

connected, its setup jumper installed, and power applied before

saving.

automatically. Be sure to review all changes before saving.

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104

B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445

Table of Contents